No matter how much the furniture industry attracts customers, people still have not lost their love for their "native" furniture - they are ready to fix and repair it to the very end, without rushing to buy a novelty. And I must say, the repair work gives a very grateful result. Especially when it comes to restoring a carved Venetian-style console. First of all, it is necessary to remove the remnants of old varnishing from the surface.To do this, it is recommended to use a special solution sold in most construction and hardware stores - the so-called "varnish remover".After treating the old varnish with it, we wait for a while, then remove the resulting mass. On carved surfaces, it is convenient to use steel wool for this, and a metal brush or stiff bristles are also suitable for this. On flat areas, use a straight spatula. The remaining varnish must be removed carefully, as well as other impurities. Take special care of the carving - there are many small pores and hidden places where a mixture of dissolved varnish and impurities may remain.Next, putty. All cracks, down to the smallest ones, must be treated with a spatula and allowed to dry. Only after that, you can start impregnating the wood, wait until it dries. Make sure that all areas of the furniture are treated with a flat brush. After this stage, you will need a grinder. It will help to get rid of chips, which are usually present on the sides of the legs and not on the external vertical ribbed elements, if any. In difficult places, put the machine aside, take the sandpaper and work with it.Now the painting. You can use any color to cover the countertop, for example, black. We do not paint the rest of the console, but simply cover it with bitumen varnish - thanks to it, the wood will acquire a deep shade and darken. The color will be about the same as buckwheat honey. Naturally, the varnish should be given time to soak and dry thoroughly. Next, take a golden patina and apply it to the raised parts of the furniture - the console will be completely transformed. A dry bristle brush or a dry sponge will be most convenient (but in the latter case, the coating will be more "soft" and delicate, so choose a brush or sponge).The illusion of gilding will evoke a classic aesthetic, which will look especially chic in a room with crystal lighting chandeliers. The countertop can be left as it is or also treated with the same patina or paint of a suitable color for tinting, but with a metallic effect. Finish the job with a finishing coat, and the new design is ready. Жители Орска используют мелбет мобильная версия , когда нужно посмотреть статистику с любого браузера. Поддержка доступна по 8 (800) 770-78-88.